4-channel input module for conversion from standard analog signals, galvanically isolated and protected against incorrect measurements due to parasitic voltages or ground loops, to ModbusRTU
Can be used for the conversion of standard unipolar voltage and current signals
4 input channels: 0...20mA, 4...20mA, 0...10V, 2...10V, 1...5V, 2...5V
All parameters can be set through the Modbus RTU interface by means of mini USB socket for programming placed on the front of the module
The software configuration, free from Drago website, for PC offers various options and diagnostic functions
The more general settings can be set using the Dipswitches
The measured values can be read out via the Modbus RTU interface (RS485), up to 247 measurement inputs in one Modbus segment
The insulation is 5-way 3 kV AC, 50 Hz, 1 min
The auxiliary power supply and the Modbus RTU can be connected through the In-Rail-Bus connector on the back of the card
Module size: 6,2mm